Support Equipment and Cases

Visual Impact Srbija doo
Oblakovska 28
11000 Beograd, Srbija
tel. +381 11 369 00 43
E-mail: info@visuals.rs

Za više informacija o našoj ponudi i zakazivanje demonstracije kontaktirajte nas

Prikaži lokaciju na mapi

Canon Novitet

Canon 17-120mm
CINE-SERVO T2.95-3.9 PL

Fujinon Noviteti

Fujinon Cabrio
19-90mm/T2.9
Perfect Amira companion

Zeiss Noviteti

Zeiss CZ.2 70-200mm/T2.8

Compact Zoom CZ.2
28-80/T2.9

Sachtler Ace XL FT GS

System Ace XL with flowtech™75 carbon fiber tripod with rubber feet

Pošaljite upit

All Tripods

This Sachtler System ACE XL with ACE XL Fluid Head and Flowtech 75 Carbon Fiber Tripod supports cameras and accessories weighing between 4.4 and 17.6 pounds, and is well suited for DSLRs, Mirrorless, and small- to medium-sized camcorders. The head features a sliding balance plate with 4.1" of adjustment to balance your camera, 8-steps of counterbalance adjustment and 3-steps plus a zero setting of independent pan and tilt drag. The slide-in plate features 4.1" of travel, and this amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.
The included Flowtech legs are a lightweight set of tripod legs that can be used without a spreader. The legs support up to 44 pounds, which means they can easily handle the weight of the ACE XL Fluid Head as well as your camera and accessories. The legs extend from approximately two feet to five feet, and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top of the leg that allows you to open the leg sections to raise or lower the leg. There is room for an optional mid-level spreader, and the legs feature a magnetic locking system strong enough to hold them together during transport, but weak enough to easily release the legs when you want to set them up. The included padded carry bag is for storing or transporting the head and legs.
Ace XL Fluid Head (75mm Bowl): The Sachtler Ace XL Fluid Head (75mm Bowl) is designed for digital cine-style cameras, supporting rigs weighing up to 17.6 pounds. This fluid head is suitable for larger DSLR and mirrorless MFT cameras, as well as pro-style cameras such as the Blackmagic URSA Mini/Pro, Canon C200/C300 Mk II, Sony FS series, and the Panasonic EVA1. The Ace XL fluid head features eight steps of counterbalance and three steps of pan and tilt drag adjustment, plus a zero drag option for pan and tilt. Mount your camera using the Ace XL Fluid Head‘s slide-in balancing plate with 1/4-20" screw and locating pin. With a sliding range of 4.1" this head can adapt to variously configured rigs. Additional features include a detachable, right-side pan bar and an illuminated bubble level. With an integrated flat head base, the Ace XL can be configured for shooting with a slider.
Compatible Cameras (Including but Not Limited To:) Blackmagic URSA Mini/Mini Pro; Canon C200/C300 Mk II; Sony FS series; Panasonic EVA1
Ace XL Fluid Head Features: Fluid head with 17-pound capacity suited for larger DSLR and mirrorless MFT cameras, and for pro-style digital cine cameras
Eight steps of counterbalance; three steps of pan and drag plus zero settings for disengaging the pan and tilt tension
75mm ball-based head has an integrated flat bottom useful for mounting to sliders, etc.
Additional features include a four-inch sliding plate range, 1/4"-20 camera screw, right-side pan bar and illuminated bubble level
Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head: With dimensions of 36.6 x 7.9 x 9.1", this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks. The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

Fluid head: ACE XL
Tripod: Flowtech 75 MS
Weight: 4.8 kg
Payload: 2 – 8 kg
Height range: 41 – 169 cm
Head fitting: 75 mm
Payload Capacity: 2 to 8 kg
Counterbalance: 8 steps
Pan/Tilt Drag: 3 steps + zero
Sliding Balance Plate Travel: 10.4 cm
Tilt Range: +90° / -75°
Leveling Bubble: Illuminated
Operating Temperature: -30 to 60°C

Sachtler Ace XL GS/MS CF
Support Equipment and Cases | Tripods

Sachtler FSB 4 / 2 GS/MS AL
Support Equipment and Cases | Tripods

Sachtler Ace M MS/GS
Support Equipment and Cases | Tripods

Manfrotto 503/525HDV
Support Equipment and Cases | Tripods

Manfrotto 502/525HDV
Support Equipment and Cases | Tripods

Secced Reach 2 kit
Support Equipment and Cases | Tripods

Secced Reach 3 kit
Support Equipment and Cases | Tripods

Secced Reach 6 kit
Support Equipment and Cases | Tripods

Secced Reach 5 kit
Support Equipment and Cases | Tripods

Specifikacija artikala je informativnog karaktera. Visual Impact d.o.o. ne odgovara za eventualne greške nastale u opisu proizvoda, greške štampanja i greške prilikom promene cene. Slike artikala su ilustrativne i ne moraju u potpunosti odgovarati artiklima.

Za više informacija o našoj ponudi i zakazivanje demonstracije kontaktirajte nas
na telefon +381(0)11 369 0043 ili na e-mail info@visuals.rs