Visual Impact Srbija doo

Oblakovska 28
11000 Beograd, Srbija
tel. +381 11 369 00 43

Za više informacija o našoj ponudi i zakazivanje demonstracije kontaktirajte nas

Prikaži lokaciju na mapi

Canon Novitet

Canon 17-120mm CINE-SERVO T2.95-3.9 PL
Canon 17-120mm

Fujinon Noviteti

Fujinon Cabrio 19-90mm/T2.9
Fujinon Cabrio
Perfect Amira companion

Zeiss Noviteti

Zeiss CZ.2 70-200mm/T2.8
Zeiss CZ.2 70-200mm/T2.8

Compact Zoom CZ.2 28-80/T2.9
Compact Zoom CZ.2

ARRI SkyPanel S30-C

LED Softlight (Blue/silver, Edison)

Pošaljite upit

All Film and Location

  • ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the blue/silver SkyPanel S30-C LED Softlight. Supported by a manual aluminum yoke, the panel‘s surface area measures 14 x 11.8", making it an ideal portable, on-the-go light source for mobile applications. Output is controlled via interchangeable thermoplastic diffusers that range from Standard to Lite to Heavy to soften the light and wrap its output around your subject and the SkyPanel S30-C outputs the equivalent of a 1,000W tungsten soft light while drawing a maximum of only 240W.
  • Using technology originally designed for the L7-C Fresnel, the SkyPanel S30-C is fully color "tuneable" allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full minusgreen to full plusgreen is also possible, so if you‘re lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 91 with the newer TLCI standard. All of these functions as well as 0-100% dimming can adjusted locally with the SkyPanel‘s onboard controller or remotely via DMX or over a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.
  • The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.
  • Fully Tuneable, Precise Color Rendering: Incorporating features of ARRI‘s successful L-Series LED Fresnels, the SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel "C" (Color) versions are fully tuneable, meaning that correlated color temperature is adjustable between 2,800K and 10,000K, with accurate color rendition over the entire range. Full plus and minusgreen correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible. Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the chroma green output for green screen color keying. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate color temperatures.
  • True Soft Light Beam Quality: Soft lights are known for their smooth quality of light and even, uniform beam field. SkyPanel‘s combination of a precise selection of diffusion panels, LED mixing chamber and large surface area allow for the light output to wrap around objects, eliminating sharp shadows and making for an ideal beauty light. The beam field is homogeneous in both color and intensity.
  • Natural Shadow Rendition: Mixing calibrated red, green, blue and white LEDs into one homogeneous beam of soft light, the SkyPanel produces not just impressive light quality, but excellent shadows rendering as well. The soft shadows cut cleanly without exhibiting multiple edges or color fringing.
  • Versatility Built In: While the SkyPanel was designed to be used primarily as a soft light to illuminate people, various built-in features make it extremely adaptable to other uses. The diffuser panels on the front of the lamp head are interchangeable, so going from the Heavy to the Lite diffusion panel can be done in a matter of seconds. With the onboard battery input, SkyPanel can be run off industry-standard batteries. The S30 can be operated at full power on battery power.
  • Built to Last: Made in Germany to the high standards for which all ARRI products are known, SkyPanel is constructed from resilient materials and assembled by hand with great care. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets. The easily-services electronics have been designed to last beyond a minimum of 25,000, up to a maximum of 50,000 hours while the LED light engine even allows for re-calibration.
  • Highly Controllable: The SkyPanel user interface is designed for ease of use with a wide range of controls available to the user. Three simple knobs adjust the color temperature, green/magenta balance, light intensity and hue and saturation instantly. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN connections.
  • Photometrics at 5 m and 3,200K
  • With Standard Diffusion: 217 lux
  • With Lite Diffusion: 235 lux
  • With Heavy Diffusion: 180 lux
  • With Intensifier: 282 lux
  • Photometrics at 5 m and 5,600K
  • With Standard Diffusion: 222 lux
  • With Lite Diffusion: 240 lux
  • With Heavy Diffusion: 185 lux
  • With Intensifier: 289 lux
  • Light Fixture:
  • Optical System: Soft diffusion panel
  • Panel Active Area (WxH): 35.5 x 30.0 cm
  • Beam Angle: 110° (half peak angle)
  • Color Adjustment:
  • White light: 2,800K to 10,000K continuously variable correlated color temperature;
  • Colored light: Full RGB+W color gamut with hue and saturation control;
  • Green-Magenta: Continuously adjustable from full minusgreen to full plusgreen
  • Color Temperature Tolerance: +/- 100K (nominal); +/- 1/8 green-magenta (nominal)
  • Color Rendering Index: CRI: >95 (average); TLCI: >91 (average)
  • Dimming: 0-100% continuous Control; On-board controller, 5-pin DMX in and through, EtherCon LAN network connectivity, USB-A
  • Remote device management: DMX setup, hour counter, and standard RDM commands
  • USB interface: DMX setup, fixture status and firmware upgrades via PC, Mac, or USB drive
  • Mounting: Combo pin baby 16 mm and junior 28 mm; Aluminum yoke; +/- 90° tilt
  • LED Lifetime: Approx. 50,000 hours (L70); Approx. <200K color shift over lifetime
  • Power:
  • Lamphead voltage input: 48 VDC
  • Power consumption: 200 W (nominal) / 240 W (maximum)
  • Lamphead power connection: Male 3-pin XLR (15 A; Pin 1: Negative / Pin 2: Positive)
  • Battery connector: Male 4-pin XLR (10 A; Pin 1: Negative / Pin 4: Positive)
  • Battery DC voltage range: 23-36 VDC
  • Battery mode light output: 100%
  • Certifications: Protection class: IP 20; CE, FCC; GS, cNRTL, CB
  • Operating Environment: -20 to +45°C
  • Dimensions: Panel: 39.7 x 34.2 x 13.3 cm
  • Panel with yoke: 50.7 x 55.9 x 13.3 cm
  • Weight: 7.8 kg
  • Power Supply:
  • Input Range: 90-250 VAC, 50-60 Hz
  • Output Range: 48 VDC
  • Input Connections: powerCON TRUE1 to Edison
  • Output Connection: Female 3-pin XLR (10 A; Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
  • Control: On/Off switch
  • Mounting: Super clamp attachment, SkyPanel PSU rail mount
  • Dimensions: 38.3 x 11.6 x 9.0 cm
  • Weight: 2.5 kg
ARRI SkyPanel S60-C

ARRI SkyPanel S60-C
Lighting | Film and Location

ARRI SkyPanel  S120-C

ARRI SkyPanel S120-C
Lighting | Film and Location

ARRI SkyPanel S360-C

ARRI SkyPanel S360-C
Lighting | Film and Location


Lighting | Film and Location


Lighting | Film and Location

ARRI M8 High Speed Set

ARRI M8 High Speed Set
Lighting | Film and Location

ARRI M18 Set

ARRI M18 Set
Lighting | Film and Location

ARRI M40 Set

ARRI M40 Set
Lighting | Film and Location

ARRI M90 Set

ARRI M90 Set
Lighting | Film and Location

Specifikacija artikala je informativnog karaktera. Visual Impact d.o.o. ne odgovara za eventualne greške nastale u opisu proizvoda, greške štampanja i greške prilikom promene cene. Slike artikala su ilustrativne i ne moraju u potpunosti odgovarati artiklima.
Za više informacija o našoj ponudi i zakazivanje demonstracije kontaktirajte nas
na telefon +381(0)11 369 0043 ili na e-mail

Recently Viewed Products